Start with the bill you already pay
A brochure running cost rarely matches what lands in your mailbox, because the brochure does not know your house. Your own bills do, so that is where Veranda Bakersfield Heat Pumps starts.
A year of electric and gas statements tells us how much energy the house uses in a 105-degree week in July and on a foggy January morning. When you ask what a new heat pump installation will cost to run, that is where we begin: your usage, your rate plan, your house. Then we change one thing at a time.
The five inputs that set your running cost
Every running cost estimate, ours included, rests on the same inputs. Change any of them and the answer changes.
| Input | What it means for your bill | What we look at |
|---|---|---|
| The house’s load | How much heat comes in each summer afternoon and leaves each winter night | Size, windows, insulation, orientation and attic, through a load calculation |
| Equipment efficiency | How much heating or cooling you get from each unit of electricity | The rated efficiency of each model we propose, and whether it runs at one speed or many |
| Duct delivery | How much of that heating or cooling reaches the rooms | Duct condition, leaks, return air and airflow, especially in a hot attic |
| Your rate plan | What each unit of electricity, and gas if you keep it, costs you | Your recent bills and the plan they show |
| How you run it | The setpoints, schedules and fan settings you live with | What you do now, and what you want to change |
The first and third inputs are about the house. The second is about the equipment. The last two are about you. That is why two neighbors with the same model can pay different amounts.
Why cooling matters most here
Because summer is where most of your bill comes from. Afternoons over 100 degrees, with ducts in attics that get much hotter, put the biggest load of the year on any system.
A heat pump cools exactly the way a central air conditioner does. So the summer side of your bill depends on cooling efficiency and duct delivery, not on the fact that it is a heat pump.
Our guide to heat pumps in Bakersfield summer heat goes deeper on the cooling side.
How we compare options fairly
A comparison only means something if every option is measured the same way. When we put two or three systems in front of you, we hold the house, the rate plan and the thermostat settings constant, and change only the equipment or the duct work.
Single-speed vs variable-speed
A variable-speed system can run at low output for long stretches instead of cycling hard on and off. Whether that saves money in your house depends on the load and the ducts, so we show it as a comparison, not a promise. The variable-speed guide explains how the operation differs.
Heat pump vs keeping gas heat
If you have a gas furnace now, we compare the winter cost of heating with electricity against heating with gas, using your own gas and electric bills. We show the cooling side separately, because it is mostly the same either way. The heat pump vs central air and furnace guide covers what changes beyond the bill.
Fixing the ducts vs not
Sometimes the cheapest running cost improvement is not the equipment at all. A crushed supply run or a missing return can make any system work longer for the same comfort. When we find that, we price the duct work as its own line and show what it does to the comparison.
What the thermostat does to the bill
How you run the system matters as much as which one you buy. A few habits make a clear difference with a heat pump:
- Steady setpoints in winter. Big setbacks followed by a fast recovery can bring on the auxiliary heat strips, which cost more to run than the heat pump itself. We set the thermostat so the strips come on only when they are needed. The auxiliary heat guide explains why.
- Fan on Auto. Running the indoor fan nonstop moves air through hot attic ducts and adds fan power to the bill.
- Schedules around your rate plan. If your plan charges more at certain hours, cooling the house a little earlier can trim the most expensive hours.
What can raise running cost after the install?
A good comparison on day one only holds if the system stays in shape. Three things tend to push the bill up over time, and you can spot each of them:
- A dirty filter. It slows airflow, so the system runs longer for the same comfort. Check it monthly in summer.
- A dusty outdoor coil. Valley dust and field debris coat the coil, and a coated coil sheds heat poorly on a 100-degree afternoon. Rinse it gently or let us clean it at maintenance.
- A change in settings. A thermostat reset after a power outage can lose its schedule or switch the fan to On.
Our maintenance schedule guide lists what we check at each visit and why it matters for the bill. The ductwork and airflow guide covers the duct side.
What we give you at the end
Your comparison shows each option’s expected yearly running cost next to what you pay now, using the same assumptions, plus the installed price from your written estimate.
For context on that installed price, Veranda’s typical range for a like-for-like ducted heat pump replacement is $6,500 to $15,500, set at the site visit and written into the estimate.
- Try it yourself first: run your numbers through the operating cost comparison tool.
- Want it built on your actual house: request an estimate and bring your bills.
