About
About Veranda
Ducted heat pumps for Bakersfield-area houses, planned from the house and priced in writing.
A system that runs all afternoon and still loses the back bedroom, an AC that quit in July, a furnace and AC both near the end? At Veranda Bakersfield Heat Pumps we plan, install, replace, repair and maintain heat pumps across Bakersfield, CA and six nearby towns. Here is how we approach a job, how we price it and how to reach us.
How do we approach a heat pump job?
From the house, not from the old equipment. Four things come before any system is chosen:
- We size from the house. A load calculation from the rooms, windows, insulation, attic and the way the house faces. The number on the old nameplate does not decide the new size.
- We check the ducts and the return. Airflow at the registers and the duct runs in the attic. A crushed run or a small return holds back any system, so we find it before you buy equipment.
- We open the panel before we talk equipment. A heat pump needs its own circuits. If the panel has room, the job stays simpler; if it does not, you hear it on the visit.
- We put it in writing. Model numbers, the size and why, duct and electrical work, the permit, removal and the startup checks, with optional upgrades priced on their own lines.
What do we do?
Ducted heat pumps from a new installation to a furnace-and-AC conversion, plus repair, maintenance, emergency calls and commercial work:
Is a repair an option?
Often, yes. When the system can still be fixed, we tell you which part failed and what it costs, and if a replacement is close, we price it beside the repair so you compare two written options. See heat pump repair and the repair-or-replace guide.
How do we price a job?
We publish our typical ranges, and your own price comes in a written estimate after the site visit. Veranda's typical range for a like-for-like ducted heat pump replacement is $6,500 to $15,500, and for a furnace-and-AC conversion it is $8,000 to $15,500.
Ducts, the panel, access and the equipment you choose move a price within its range, and the estimate lists each one. We never count a rebate in your price until it is approved. The cost guide shows what moves the number, and the terms set out how the work is arranged.
Where do we work?
Bakersfield and six towns around it:
The service areas page covers the housing, utilities and what to expect in each town.
When can you reach us?
Mon-Fri 8am-6pm, Sat-Sun 9am-2pm. Outside these hours we take emergency calls only.
Call (661) 269-7726 or send the form at the bottom of this page. Tell us what heats and cools the house now, what stopped working and roughly where the house is. The contact page has the rest.
How a job runs
Call
Tell us what heats and cools the house now, how old it is and what stopped working.
Visit
We walk the house, run the load calculation and check the ducts, the return, the panel and where the outdoor unit can go.
Written estimate
Model numbers, size and why, duct and electrical work, the permit, removal and startup checks, with optional upgrades priced separately.
Install and startup
We set and connect the system, check airflow and both modes, and leave you the startup readings.
Ask about your house
Tell us what heats and cools it now and what you would like to change. We set up the site visit from there.