What kind of home is it?
That is the first question on an Arvin call, before “how many tons?” At Veranda Bakersfield Heat Pumps, the answer decides the equipment, how it connects and what the estimate has to cover, so we start there.
Arvin sits about 16 miles southeast of Bakersfield, where the valley floor meets the Tehachapi foothills. Its homes are a mix. U.S. Census Bureau figures put about three in four Arvin homes as single-family houses and about 6% as mobile homes.
What if it is a single-family house?
Then the job is a ducted heat pump replacement or, if a gas furnace still does the heating, a conversion. We run a load calculation, test the ducts and the return, check the panel and look at the outdoor spot.
The indoor and outdoor equipment have to be a matched pair. A heat pump on the old indoor coil can run, but not the way it was designed to, and the system’s rated capacity depends on the match. We list both model numbers in the estimate, and the matching guide explains why the pairing matters.
What a house job costs
Veranda’s typical range for a like-for-like ducted heat pump replacement is $6,500 to $15,500, and for a furnace-and-AC conversion it is $8,000 to $15,500. Four things decide where a house lands:
- The size the load calculation calls for.
- The condition of the ducts and the return.
- Whether the panel has room for the new circuit.
- Where the outdoor unit goes.
Our heat pump replacement and furnace-to-heat-pump conversion pages cover each job.
What changes in a manufactured home?
Almost everything about how the system connects. The ducts run under the floor, the equipment that connects to them is built for that kind of home, and the floor, the skirting and the electrical service shape what can go where.
On site we look at:
- The weight the floor and frame can carry, and the clearances around the equipment.
- How the outdoor unit will be supported.
- The condition of the under-floor ducts, which can come loose or tear over the years.
If you live in one, tell us when you call. We check what is there now and tell you plainly what fits before we price anything. If a heat pump is not the right answer for your home, we say so.
What about a duplex or a small rental?
We size and price each unit on its own. Each one has its own rooms, its own load and its own share of the electrical service, so the estimate shows a separate line for each side.
Work in an occupied unit is planned around the people living there. We agree the day with you, keep the time without cooling as short as the job allows, and finish one unit’s startup before we leave it.
Can you do a shop or small office?
Yes. A shop, an office or a small business in Arvin runs on different hours, often has more people and equipment inside, and needs work scheduled around opening times.
We assess the space on site, and the written estimate covers the equipment, access, electrical work and how the job fits around your business. The commercial heat pump installation page and the commercial planning guide explain the process.
How we keep the work short in an occupied home
We agree the day in advance, cover floors on the path to the air handler and keep the time without cooling short. On a hot day we plan the changeover for the morning, so the new system runs before the afternoon heat.
Before we leave, we start the system and check airflow and both modes, and we leave you the startup readings. If the panel or the ducts need work that was not visible on the first visit, we stop and tell you the cost before we do it.
Where can the outdoor unit go?
Wherever it gets air on every side, a firm pad and somewhere for the condensate to drain. If the old one sits in a hot corner against a west wall, we look for a better spot.
The new spot keeps the clearances its instructions call for and stays away from bedroom windows where the lot allows. Valley dust loads outdoor coils, so we leave every side reachable for cleaning. The placement guide covers sound and drainage.
Will a heat pump keep an Arvin home warm in winter?
Yes, for the winters here. Arvin sits at the foot of the foothills and winter mornings can be cold, but a heat pump moves heat from the outdoor air into the house well at those temperatures.
On the coldest mornings the outdoor coil can frost, and the system clears it with a short defrost cycle. Auxiliary heat strips in the air handler cover the coldest hours if they are needed, and we set the thermostat so they do not come on before they have to.
Who handles the permit, and what if it breaks down?
We handle the permit. PG&E supplies electricity in Arvin and SoCalGas supplies gas. The permit office depends on the address, so we check it before the permit is filed, and the permit is a line in the written estimate.
If the system stops working, call us. We tell you on the phone when we can get there and what to do in the meantime. For problems that are not urgent, start with heat pump repair, and the repair symptoms guide lists what you can safely check first.

